| 當前位置：首頁->方案設計 |
|
| AD7403 高性能二階Σ－Δ調制解決方案 |
|
|
| 文章來源： 更新時間：2014/9/9 9:39:00 |
在線咨詢： |
| |
ADI公司的AD7403是高性能二階Delta-Sigma調制器,能把模擬輸入信號轉換成高速單比特數據流,外時鐘頻率5-20MHz,16位不丟失碼,SNR 88dB,溫度漂移1.6 μV/℃, 滿刻度輸入范圍±320 mV,工作溫度−40℃ 到 + 125℃,主要用在馬達控制,電源和太陽能逆變器,數據采集系統,風能逆變器,并聯電流監視器等.本文介紹了AD7403主要特性,框圖, 評估板EVAL-AD7403FMCZ主要特性,框圖,電路圖,材料清單和PCB元件布局圖.
The AD7403 is a high performance, second-order, Σ-Δ modulator that converts an analog input signal into a high speed, single-bit data stream, with on-chip digital isolation based on Analog Devices, Inc., iCoupler® technology. The AD7403 operates from a 5 V (VDD1) power supply and accepts a differential input signal of ±250 mV (±320 mV full-scale). The differential input is ideally suited to shunt voltage monitoring in high voltage applications where galvanic isolation is required.
The analog input is continuously sampled by a high performance analog modulator, and converted to a ones density digital output stream with a data rate of up to 20 MHz. The original information can be reconstructed with an appropriate digital filter to achieve 88 dB signal to noise ratio (SNR) at 78.1 kSPS. The serial input/output can use a 5 V or a 3 V supply (VDD2).
The serial interface is digitally isolated. High speed complementary metal oxide semiconductor (CMOS) technology, combined with monolithic transformer technology, means the on-chip isolation provides outstanding performance characteristics, superior to alternatives such as optocoupler devices. The AD7403 device is offered in a 16-lead, wide-body SOIC package and has an operating temperature range of −40℃ to +125℃.
AD7403主要特性:
5 MHz to 20 MHz external clock input rate
16 bits, no missing codes
Signal-to-noise ratio (SNR): 88 dB typical
Effective number of bits (ENOB): 14.2 bits typical
Typical offset drift vs. temperature: 1.6 μV/℃ typical
On-board digital isolator
On-board reference
Full-scale analog input range: ±320 mV
−40℃ to + 125℃ operating range
High common-mode transient immunity: >25 kV/μs
16-lead, wide-body SOIC, with increased creepage package
Slew rate limited output for low electromagnetic interference (EMI)
Safety and regulatory approvals (pending)
UL recognition
5000 V rms for 1 minute per UL 1577
CSA Component Acceptance Notice 5A
VDE Certificate of Conformity
DIN V VDE V 0884-10 (VDE V 0884-10):2006-12
VIORM = 1250 VPEAK
AD7403應用:
Shunt current monitoring
AC motor controls
Power and solar inverters
Wind turbine inverters
Data acquisition systems
Analog-to-digital and opto-isolator replacements
圖1. AD7403框圖
評估板EVAL-AD7403FMCZ
The EVAL-AD7403FMCZ is a full featured evaluation board designed to allow the user to easily evaluate all features of the AD7403 isolated analog-to-digital converter (ADC). The evaluation board can be controlled by the EVAL-SDP-CH1Z via FMCZ connector (J9). The SDP-H1 board (EVAL-SDP-CH1Z) allows the evaluation board to be controlled through a USB port of a PC using the evaluation board software available for download from the product page or from the included installer CD.
On-board components include the following:
ADuM6000: isolated iCoupler® 5kV, DC / DC converter
ADP2441: 36 V, 1A, synchronous, step down DC-DC regulator
ADP7104ARDZ-5.0: 5 V low noise LDO
評估板EVAL-AD7403FMCZ主要特性:
Full featured evaluation board for the AD7403
On-board power supplies
Standalone capability
System demonstration platform (SDP-H1) compatible (EVAL-SDP-CH1Z)
PC software for control and data analysis (CD with software included in evaluation kit)
評估板EVAL-AD7403FMCZ包括:
Evaluation board
CD containing evaluation board software installation
Additional Equipment Required
EVAL-SDP-CH1Z (must be ordered separately) includes a USB cable and 12v wall wart.
Signal source
PC running Windows XP SP3, Windows Vista, or Windows 7 with USB 2.0 port
圖2.評估板EVAL-AD7403FMCZ(左)和EVAL-SDP-CH1Z(右)的建立圖
圖3.評估板EVAL-AD7403FMCZ框圖
圖4.評估板EVAL-AD7403FMCZ電路圖(1)
圖5.評估板EVAL-AD7403FMCZ電路圖(2)
圖6.評估板EVAL-AD7403FMCZ PCB頂層元件布局圖 |
| |
|
|
|
|
|
| |
|
| |
|
|
